Pattern Printing Roller Car Sunshade For Windshield

Pattern Printing Roller Car Sunshade For Windshield

Front shade is not too many varieties, generally have aluminum foil and non-woven two kinds. Aluminum foil generally divided into ordinary "light plate" type and pattern type, the size is generally 60*130cm, suitable for most small cars. The aluminum foil insulation with sucker is easy to use, after the expansion, suction in the front windshield or the rear window glass. In not too hot season, you can put the color pattern outward, if the weather is very hot, then aluminum foil outward to ensure reflection of the sun. In the selection of the front shade, it is best to choose with sucker, material texture to be more hard. "Light plate" type or too cheap front shade is not quite enough, it is easy to fall down, so do not covet cheap. Generally have a brand of front shade packaging materials used better, there are special to place the sucker, sucker is not easy to squeeze bad. The worst brand is that the sucker is squeezed out and the remedy is to put it in boiling water for a while. If the front window glass of the car is wider, the general front shade can not be blocked, the choice of two pairs of shade, such as the Jeep type is covered. Some vehicles have no shading areas at the top of the front window glass and can post a windshield sticker. It can not only beautify the vehicle, but also can play a part of the shading function.

Description

Front shade is not too many varieties, generally have aluminum foil and non-woven two kinds. Aluminum foil generally divided into ordinary "light plate" type and pattern type, the size is generally 60*130cm, suitable for most small cars.

The aluminum foil insulation with sucker is easy to use, after the expansion, suction in the front windshield or the rear window glass. In not too hot season, you can put the color pattern outward, if the weather is very hot, then aluminum foil outward to ensure reflection of the sun. In the selection of the front shade, it is best to choose with sucker, material texture to be more hard. "Light plate" type or too cheap front shade is not quite enough, it is easy to fall down, so do not covet cheap. Generally have a brand of front shade packaging materials used better, there are special to place the sucker, sucker is not easy to squeeze bad.

The worst brand is that the sucker is squeezed out and the remedy is to put it in boiling water for a while. If the front window glass of the car is wider, the general front shade can not be blocked, the choice of two pairs of shade, such as the Jeep type is covered. Some vehicles have no shading areas at the top of the front window glass and can post a windshield sticker. It can not only beautify the vehicle, but also can play a part of the shading function.

When driving in the summer, the sunlight coming in from the side window is quite powerful. Paste the general membrane effect is not very ideal, still can bask skin hair hot.

Here are several side shading. 1, the ordinary gauze net type side shade is blocked.

This kind of sunshade is usually with two suction cups, or a sucker in the middle, the advantage is easy to remove, but the problem is that when the window to shake down, may touch off the sucker, especially only two cups that side shade, it is easy to fall down. 2, electrostatic paste side shading. Electrostatic Paste Side shading screen is better than the net-type shading effect. Unique mesh wisp of empty translucent design, will not let people have the feeling of tightness and being closed. When pasting, it is best to put the bottom into the window seam 5cm or so, so that will not appear when the static roll down the glass when the situation. When not in use, the electrostatic paste directly pull down, wash with water, and then roll up with smooth paper, can be reused later.

To purchase static stickers to pay attention to, to ask whether the material is soft or hard. Some manufacturers use relatively poor, make out the product is more hard, like cardboard, new products open when the electrostatic burst sound is small, this kind of electrostatic paste used for a long time, the absorption will soon disappear, thus falling down. Other also need to pay attention to, should be based on the size of their own window to choose the right size of the electrostatic paste, too small will reduce the effect of shading, too large will block the view of the rearview mirror


Hot Tags: pattern printing roller car sunshade for windshield, China, manufacturers, suppliers, wholesale, customized, in stock

Related Products

Feedback

Products List